Tutorial: Motorised Ipod Tray

This work is licensed under a Creative Commons Attribution-NoDerivs 3.0 Unported License. N.B. : This article is compiled…. Courtesy : AudiWorld This article teaches how to motorise an iPod tray via servo motors. Once removed from the dash, the compartment was disassembled into the box, door front, and door back. The back of the door … Continue reading →

Simulink Tutorial: Automatically Tuning a PID Controller

A PI controller can be modeled easily in software such as Simulink using a “flow chart” box involving Laplace operators. Watch video below.